[. . . ] The day of the week is set automatically in accordance with the date setting. · Pressing + or ­ while the Time Setting Screen is on the display causes the seconds count to be reset to 00. [. . . ] · The the alarm sound changes over four levels as it sounds. Stopping the Alarm Snooze Alarm On · When the alarm is sounding, press the SNOOZE/LIGHT button (1) to stop it. When the snooze feature is turned on, the alarm will sound again in about five minutes. · To turn off the snooze feature, slide the Alarm Mode selector (6) to OFF. Demo Alarm Press the DEMO button (5) to sound the alarm. Alarm on indicator Snooze on indicator USING THE LIGHT Pressing the SNOOZE/LIGHT button (1) turns on the light and illuminates the display for easy reading in the dark. Important! OPERATING PRECAUTIONS · Do not use or store this clock in areas exposed to temperature extremes, strong magnetism, strong vibration, or strong impact. · Never use the clock in a bathroom or any other area subject to high humidity. · To clean the clock, use a soft, dry cloth or a cloth moistened in a solution of water and a mild neutral detergent. · The LCD may become difficult to read at temperatures outside of the operating temperature range (0 to 40°C). · Display figures may be difficult to read when viewed from an angle. · Be sure to keep all user documentation handy for future reference. assumes no responsibility for any loss, or any claims by third parties that may arise through the use of this clock. · Overuse of the light can shorten battery life. THERMOMETER FUNCTIONS · A built-in sensor measures temperature and shows the measured value on the display. · The temperature display shows "LL" for temperatures below ­20°C and "HH" for temperatures above 50°C. [. . . ] · Should batteries ever leak while in the clock, wipe out the fluid with a cloth, taking care not to let any get onto your skin. · Replace the batteries at least once a year, even if the current batteries are working properly. [. . . ]